Samsung RF24FSEDBSR Re-Attaching The Refrigerator Doors, Disassembling The Flex, setting up

RE-ATTACHING THE REFRIGERATOR DOORS

3.Press the locking tab and separate the Wire Connector.

To reattach the fridge doors after you have moved the fridge to its fi nal location, assemble the parts in reverse order.

1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.

Type A	Type B
	Dispenser
Center of Transparent coupler	The Guide Lines
clip A (6.35 mm)	clip A (6.35 mm)

When reassembling it, be sure to connect CAUTION the wire harness.

If it is not connected, the Flex Room does not work.

4.Remove 1 hex head bolt from each side with a socket wrench (10 mm).

2. Insert the clip in the install pack and check that it holds the line fi rmly.

DISASSEMBLING THE FLEX
DOOR	5.	Lift up the Flex door from the rails.

1.Take out the Flex Zone ( 1 ) by lifting it up.

1

2.Take off the cover ( 2 ) w/harness with a fl at- blade screwdriver (-).

2

Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost

build-up.

18_ setting up

DA68-02916A (EN)-07.indd 18 2014. 5. 19. ￿￿ 2:06