To save electricity, the Panel Display turns off automatically under the following conditions: When no button has been pressed, when no doors are open, or when no Dispenser Lever has been pushed. However, the icon indicating your cubed or crushed ice selection, or sparkling water selection, will stay on. When you press a button, open a door, or push a Dispenser Lever, the Panel Display will turn on again. All function keys will become operational after you remove your finger from the button you pressed.
( 10 ) | Water filter usage | |
Filter | ||
This icon lights up when you need | ||
| ||
| to change the fi lter, usually after the | |
| refrigerator has dispensed about 300 | |
| gallons of water (after about 6 months). | |
| After you install the new water fi lter, reset | |
| the fi lter indicator by touching and holding | |
| the Hold 3sec for Filter Reset button for | |
| 3 seconds. | |
| - If water is not dispensing or | |
| dispensing slowly, you need to | |
| replace the water fi lter because | |
| the water fi lter is clogged. |
-Some areas have large amounts of lime in their water, which causes the water fi lter to clog more quickly.
CHANGING THE WATER FILTER
To reduce the risk of water damage WARNING to your property DO NOT use generic
brands of water fi lters in your SAMSUNG
Refrigerator. |
|
USE ONLY SAMSUNG BRAND |
|
WATER FILTERS. SAMSUNG is not |
|
legally responsible for any damage, |
|
including, but not limited to, property |
|
damage caused by water leakage | (Red) |
from the use of a generic water fi lter. |
|
SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filters.
The Filter light turns red to let you know when it is time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light comes on just before the capacity of the current
filter runs out. Changing the fi lter on time provides you with the freshest, cleanest water from your refrigerator.
To change the water fi lter, follow these steps:
1.Shut off the water supply. Then, turn the water fi lter ( 1 ) about 1/4 turn,
|
|
| 2 |
|
|
|
| 1 | 02 |
|
|
|
| |
2. | Pull the water fi lter ( 1 ) from the case fi lter ( | 2 ). | OPERATING | |
| ||||
| • To change the water fi lter more easily, |
| ||
|
| shut off the water supply valve. |
|
|
• | Sometimes, it is hard to disassemble the water |
| ||
| fi lter because impurities in the water cause it |
| ||
| to stick. If you are having diffi culties, grip the |
| ||
| water fi lter fi rmly and pull it hard. |
|
| |
• | When you pull the water fi lter, a little water |
|
| |
| can leak from the opening. This is normal. |
|
| |
| To minimize the water leaks, keep the fi lter |
|
| |
| cartridge horizontal when you pull it. |
|
| |
• | To prevent overfl ow, |
|
| |
| empty the water | 2 |
| |
| fi lter tray ( 3 ) and | 3 |
| |
| dry around the fi lter |
| ||
|
|
| ||
| case ( 2 ). |
|
| |
3. | Insert the new fi lter into the fi lter case ( 4 ). |
|
| |
4. | Push the fi lter, and then turn it clockwise until |
| ||
| it locks. |
|
| |
| • | If you have trouble inserting the water |
| |
|
| fi lter because of high water pressure, |
|
|
|
| shut off the water supply valve. |
|
|
| • | The locked symbol should be lined up |
| |
|
| with the indicator line. |
|
|
|
| 4 |
|
|
5.Touch the “Alarm/hold 3 sec for Filter Reset” button ( (Filter Reset) ) for about 3 seconds to reset
the water fi lter. The color of
the indicator ( ) changes from red to off.
6.If you turned off the water supply, turn it back on.
operating _25
2014. 5. 19. 2:06 |