Parts for water line Installation
Water line fi xer and screws | Pipe connector |
Water line
Connecting to the water supply line
1.First, shut off the main water supply line.
2.Locate the nearest cold, drinking water line.
3.Follow the Water line Installation Instructions in the installation kit.
CAUTION
The water line must be connected to the cold water pipe. If it is connected
Connecting the water line to the refrigerator
1.Remove the cap from the water line on the unit and insert the compression nut of the water line into the water line on the unit.
2.Connect the water line on the unit with the water line in the kit .
3.Tighten the compression nut onto the compression fi tting. There should be no gaps between (A, B & C )
4.Turn water on and check for any leakage.
Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug,
Loosen a | Remove | |
cap | ||
|
01 SETTING UP
to the hot water pipe, it may cause the purifi er to malfunction.
Close Main |
Water pipe |
Water Line |
from unit |
Water Line |
from Kit |
No gap |
Close Main | No gap |
Water pipe |
|
4.After connecting the water supply to the water fi lter, turn your main water supply back on and dispense about 3L to clear and prime the water fi lter.
Before being used, the leakage in these CAUTION places should be examined.
•Samsung Warranty does not cover
WATER LINE INSTALLATION.
• It will be done at customer’s charge unless the retail price includes installation cost.
•Please contact Plumber or Authorized Installer for the installation if needed.
•If Water leakage occurs due to improper installation, Please contact installer.
setting up _21
2014. 5. 19. 2:06 |