RE-ASSEMBLING THE FLEX DOOR
To reattach the fl ex doors, assemble parts in reverse order.
Be sure to connect the Flex Door Wire CAUTION Connector.
If it is not connected, the Flex Room does not work.
DISASSEMBLING THE
FREEZER DOOR
1.Take out the upper drawer by lifting it up.
2.Remove the freeze room guard ( 1 ) by lifting the guard up.
Be careful not to scratch or dent the CAUTION sliding rail by letting it strike the fl oor.
Make sure that you mount the freezer CAUTION basket in the right position when removing
/installing the freezer door. Failing to do so may result in the door not opening or closing properly.
Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost
01 SETTING UP
1
3.Take out the lower basket ( 2 ) by lifting the basket up from the rail system.
2
4. Press the fi xing hook of the rail system.
RE-ASSEMBLING THE FREEZER DOOR
To reattach the drawer after you have moved the fridge to its fi nal location, assemble the parts in reverse order.
5.Holding the top of the Freezer Drawer, pull it out all the way, and then remove it from the rail system.
ADJUSTING THE LEVEL
Make sure the refrigerator is level so that you can make fi nal adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level
setting up _19
2014. 5. 19. 2:06 |