Samsung RF28HFEDBSR/ML manual Leveling the Refrigerator, RE-ASSEMBLE the Freezer Drawer

Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost

build-up.

LEVELING THE REFRIGERATOR

Make sure the refrigerator is level so that you can make final adjustments.

Use a level to test if the refrigerator is level both side to side and back to front.

If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.

How to adjust the level

1.Open the freezer drawer and remove the lower basket.

2.Insert a flat-blade screwdriver (-) into a notch on the left control lever, and then turn it counter- clockwise to level the refrigerator.

(You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

up setting

RE-ASSEMBLE THE FREEZER DRAWER

To reattach the drawer after you have moved the fridge to its final location, assemble the parts in reverse order.

flat-blade
	Control Lever
screwdriver (-)

Both control levers must be touching the CAUTION floor to avoid possible personal injury or

property damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever.

Instead, refer to the next page for the best way to make minor adjustments to the doors.

English - 21

DA68-02953B-01.indb 21 2016. 12. 16.

�� 11:05