Samsung RF28HFEDBSR/ML manual Required Tools Not provided, With the door opened

Required Tools (Not provided)

You need the following tools to complete the installation of your refrigerator:

Philips	Flat-blade screw	Socket wrench
screwdriver (+)	driver (-)	(13/32”) (10 mm)
Pliers	Allen wrench
	(3/16”) (5 mm)

With the door opened

1.Remove 3 screws holding down the TOP TABLE ( 1 ) and separate the connected wires.

3.Pull and remove the hinge lever ( 5 ).

Remove the ground screw ( 6 ) attached to the upper left door hinges with a philips screwdriver

(+). Remove the upper left and right door hinges ( 7 ).

(5) (6)

(7)

4. Lift the door straight up to remove.

up setting

(1)

2.Disconnect two connectors ( 2 ) on the left side door.

To remove the water coupler from the hinge, twist and pull it from the hinge.

Remove the water line ( 3 ) while pressing the marked part ( 4 ) of the water line coupler.

(2)

(3)

(4)

5.Remove the screw ( 8 ) attached to the lower left and right door hinges with a philips screwdriver (+).

Remove the 2 hex head bolts ( 9 ) attached to the lower left and right door hinges with an allen wrench (3/16”).

Remove the lower left and right door hinges ( 10 ).

(10)

(8)

(9)

Allen wrench

English - 19

DA68-02953B-01.indb 19 2016. 12. 16.

�� 11:05