Samsung RF28HFEDBSR/ML Frost forms on, Walls, Freezer, Dispenser is not, Functioning, Auto close

PROBLEM	SOLUTION
Frost forms on	• Is the air vent blocked?
the walls of the	Remove any obstructions so air can circulate freely.
freezer.	• Allow sufficient space between the stored foods for efficient air circulation.
	• Is the freezer drawer closed properly?
	If the freezer drawer is not completely closed or is blocked, humidity from outside
	may enter and cause severe frost to form.
The water	• Is the water line connected and the shut-off valve opened?
dispenser is not	• Has the water supply line tubing been crushed or kinked?
functioning.	• Make sure the tubing is free and clear of any obstruction.
	• Is the water tank frozen because the fridge temperature is too low?
	Try selecting a warmer setting on the Digital display.
	• Is the Child Lock on?
	• Check if the filter is properly installed.
	If it is not properly installed, the water dispenser may not work.
The auto close	• Is there an imbalance between the right and left parts of the door?
system does not	• Open and close the door smoothly 1~2 times.
work with the	After you do this, the auto close system usually works properly again.
freezer door.	• Try opening the door smoothly to avoid unbalancing the right and the left part of the
	door.
Condensation or	• Condensation or water drops may form if the humidity is too high while the
water drops forms	refrigerator is operating.
on vertical mullion	• If condensation or water drops appears on vertical mullion and surroundings, etc.,
and surroundings,	turn the Energy Saver mode off after removing the condensation.
	(See the explanation of the Energy Saver button in “Using the control panel” on page
etc.
	26.)

English - 42

DA68-02953B-01.indb 42 2016. 12. 16.

�� 11:06