4.Attach the Adjustable Leg Cover using a Phillips
(+) Screwdriver.
How to Assemble Fridge Door
1.Attach the detached Fridge Door to the Mid Hinge.
2.Slide the Fridge Hinge (C) into the fixing slot, and then press it down so that it is aligned with the hole in the door.
C
3.Inserting the Fixer Lever (B) in the direction of the arrow, and then flip it down to assemble.
B 
B
4.Assemble the Wire Connector.
12_ setting up
5.Connect the Water Tube [E]. If the model has red clips, attach them now to the Coupler [F]. Connect the connector [G] on the left door and the connector [H] on the right door.
G
H
Red Clip
E (6.35mm)
F
6.Attach the front of the Top Cover, and then press down on its back until it lies flat. Re- attach the screws.
•Assemble the Fridge and Freezer doors CAUTION in the reverse order of disassembly.
•If the Wire Connectors are cross- assembled, the display will not work properly.
•Clips are located inside the cap on the top.
•To prevent water leaks, if the refrigerator uses red clips, make sure the red clips are properly connected to the Coupler after you insert the Water Tube [E] into the center of the Coupler.
E | clip A | Center of the |
| (6.35 mm) | Indicator Line |
13. 12. 2. |
��
5:05
