Samsung RF32FMQDBSR user manual Making ICE, Using the ICE OFF Function, Going on Vacation, Bucket

making process will look white, which indicates they are generated normally.

•If ice doesn’t come out, pull out the ice bucket and press the Test button located on the right side of ice maker. See the illustration under Making Ice below.

•Do not press the Test button continuously if

the tray is filled	with ice or	water. Water may
overflow or ice	may jam the	bucket.

MAKING ICE

• To fill the ice bucket to maximum capacity after installation, follow these steps:

1.Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

-- Waiting 24 hours will allow your ice maker to cool properly.

2.Dispense 4 to 6 ice cubes into a glass.

3.After another 8, and then 16 hours, dispense a full glass of ice.

•To test the ice maker, press the Test button on the ice maker. You will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button.

•The chime sounds automatically again to let you know the ice maker is working well.

check the water level

Test button

•If you want to remove ice cubes without CAUTION using the ice bucket, turn the ice maker off and remove the front cover from the ice maker. Then, remove the ice cubes.

Note that with the cover removed, the ice cubes in the ice maker can spill out.

•Do not put food in the ice bucket. If you CAUTION store food in the ice bucket, the food can

strike the ice maker when you open or close the door, causing damage to the ice maker.

•Note that the ice cubes in the ice bucket CAUTION may spill out over the drawer when you

remove the ice bucket from the drawer. If this occurs, be sure to pick up any ice cubes that spill.

•If a power failure occurs, ice cubes CAUTION may melt then freeze together when

the power comes back on, causing the dispenser to stop working.

To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water.

•If you use all the ice at once, you must

repeat Steps 2 and 3 above.
However, only wait 8 hours before dispensing the	02operating
first 4 to 6 ice cubes. This will replenish the ice
cubes and ensure maximum ice production.
USING THE ICE OFF FUNCTION

When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice cubes may clump together, making it difficult to remove them.

To remove the ice bucket, push the button on the upper right of the bucket (1 in the illustration above), lift up the bottom, and then pull out.

To put the bucket back in, push the bucket straight back until you hear a click. If the bucket does not fit, turn the helix 90 degree (see the last illustration on the right, above) and try again.

•Use only the ice maker provided with CAUTION the refrigerator. The water supply to

this refrigerator must only be installed/ connected by a suitably qualified person. Connect to a potable water supply only.

GOING ON VACATION...

If you are going on a long vacation or business trip and won’t use the water or ice dispensers for a long time:

-- Close the water valve. Otherwise, water leakage may occur.

-- Remove all food.

-- Unplug the refrigerator.

-- Wipe excess moisture from inside and leave the doors open. Otherwise, odor and mold may develop.

operating _21

DA68-02918A-02.indb 21 13. 12. 2.

�� 5:05