Samsung RF32FMQDBSR user manual Changing the Water Filter

Models: RF32FMQDBSR

1 84
Download 84 pages 57.48 Kb
Page 18
Image 18

CHANGING THE WATER FILTER

To reduce risk of water damage to your WARNING property DO NOT use generic brands

of water filters in your SAMSUNG Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG will not be legally responsible for any damage, including, but not limited to, property damage caused by water leakage from the use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.

The Filter light turns red to let you know when it is time to change your water filter cartridge.

To give you time to get a new filter,

 

the red light comes on just before the

(Red)

capacity of the current filter runs out.

 

Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.

1.Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise.

2.Pull the water filter ( 1 ) from the case filter ( 2 ).

2

1

• To change the water filter more easily, shut off the water supply valve.

• Sometimes, it is hard to disassemble the water

filter because impurities in the

water cause it to

stick. If you are having difficulties, grip the water

filter firmly and pull it hard.

 

• When you pull out

 

the water filter, a little

2

water can leak from

3

the opening. This is

normal. To minimize

 

the water leaks, keep the filter

cartridge

horizontal when you pull it.

 

To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ).

3.Insert the new filter into the filter case (4 ).

4.Push the filter in, and then turn it clockwise until it locks.

If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.

18_ operating

The locked symbol should be lined up with the indicator line.

4

5. Touch the “Alarm/hold

3 sec for Filter Reset”

button ((Filter Reset)) for about

3 seconds to reset the water filter. The color of the

indicator ( ) changes from red to off.

6. If you turned off the water supply, turn it back on.

• For a replacement water filter, visit your local home Improvement center, go to SamsungParts.com on line, or contact your authorized Samsung dealer.

Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter.

Removing any residual matter inside the water supply line after installing the water filter.

1.Turn ON the main water supply and supply water

2.

from water supply line.

Run water through the

 

dispenser until the water

 

runs clear (approx. 6 to 7

 

minutes). This will clean

 

the water supply system and remove air from

3.

the lines.

Additional flushing may be required in some

 

households.

4.Open the Refrigerator door and make sure there are no water leaks coming from the water filter.

Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser.

This means that there is still air in the line.

DA68-02918A-02.indb 18

13. 12. 2.

�� 5:05

Page 18
Image 18
Samsung RF32FMQDBSR user manual Changing the Water Filter