( 4 ) Energy Saver (Hold 3 sec for °C↔°F)
Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights.
Turn Energy Saver off and the icon goes off. The Energy Saver function is set to “ON” in the factory.
If condensation or water drops appear on the doors, turn the Energy Saver mode off.
Touch and hold this button for 3 seconds to switch the temperature units between °C and °F.
( 5 ) Fridge (Hold 3sec for Power Cool)
Touch this button to set the fridge to your desired temperature. You can set the temperature between
34 °F and 44 °F (between 1 °C and
7 °C). Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. This can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open).
( 6 ) Lighting (Hold 3 sec for child lock)
Touching this button sets the Dispenser LED lamp (under the display) to continuous mode so that it stays on continuously.
The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, touch this button to turn the continuous mode off. Also, pressing this button for 3 seconds turns on Child Lock which locks the display panel and dispenser buttons so the buttons can not be used. The Child Lock icon lights up to indicate you’ve activated the Child Lock function. Press 3 seconds to unlock.
( 7 ) Ice Type |
| |
Press the Ice Type button to change |
| |
the ice type. Each time you press |
| |
the Ice Type button, the cubed and |
| |
crushed ice modes alternate and the |
| |
Cubed or Crushed ice icon lights up, |
| |
indicating your selection. |
| |
If you don’t need ice, turn the function |
| |
off to save on water and energy | 02operating | |
consumption (See Ice Off below). | ||
|
( 8 ) Ice Off (Hold 3 sec)
Press the Ice Off button for 3 seconds until the Ice Off Indicator ( 
) illuminates.
( 9 ) Filter
Water filter usage
This icon will light up when you need to change the filter. After you use about 300 gallons of water, the filter indicator lights up (in about 6 months). After you install the new water filter, reset the filter indicator by pressing the Alarm/hold 3 sec for Filter Reset button.
• If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.
• Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.
Cooling Off Mode
-North American (US, Canada) Models Only ; Cooling Off mode (also called Shop
mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator’s fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold. To start Cooling Off mode, touch and hold the CoolSelect button and the Freezer button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes “OFF”.
To cancel Cooling Off mode, touch and hold the CoolSelect and the Freezer buttons again for 5 seconds.
operating _17
13. 12. 2. |
��
5:05
