ASSEMBLE THE FLEX DOOR
To reattach the flex doors after you have moved the fridge to its final location, assemble parts in reverse order.
Be sure to connect the Flex Door Wire Connector. If it is not connected, the Flex
CAUTION Room does not work.
DISASSEMBLE THE FREEZER DRAWER
1. Take out the upper drawer by lifting it up.
2.Remove the freeze room guard ( 1 ) by
lifting the guard up. | 1 |
|
3.Take out the lower
basket ( 3 ) by lifting | 3 |
|
the basket up from the rail system.
4.Remove 4 hex head
bolts from both sides with a socket wrench (10mm).
5.Lift up the freezer door from the rails.
Putting too much food into the freezer drawers can prevent the freezer from CAUTION closing completely and can cause frost
08_ setting up
ASSEMBLE THE FREEZER DRAWER
To reattach the drawer after you have moved the fridge to its final location, assemble parts in reverse order.
ADJUSTING THE LEVEL
Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.
How to adjust the level
Insert a
Both control levers must be touching the floor
CAUTION to avoid possible personal injury or property damage because of tipping.
If the right side is lower, perform the same procedure, but with the right control lever.
It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments wIth the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.
13. 4. 25. �� 2:18 |
