3.Assemble the handles after switching the side of the Fridge handle and the Freezer handle.

3.Change the positions of the Handle slider and spring from the left side to the right side.

Make sure to change position of the Handle slider cap from the right side to the left side.

Slider

Spring

4. Tighten 2 screws underneath the Fridge door and then assemble 2 screws and 2 Cap sheets on

the Freezer door.

4. Assemble the door handle by following step 2 and 1 in reverse order.

REVERSING THE DOOR

HANDLE (TYPE B)

1.Remove 2 screws underneath the Fridge door and then pull the Handle cover.

Screw

Cover handle

Disassemble the Handle cover carefully. WARNING Hooks inside of the Handle cover can break

easily.

2.Remove 2 screws on the Handle grommets. Remove the Handle grommets and disassemble the Easy handle.

Screw

Grommethandle

18_ setting up

Screw

This procedure must be done before ‘Reversing the Refrigerator Door’ step 23.

LEVELLING THEREFRIGERATOR

If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.

Turn the adjusting legs clockwise to raise and counter-clockwise to lower the height.

Case 1) The appliance tilts down to the left.

•Turn the left adjusting leg in the direction of the arrow until the appliance is level.

Case 2) The appliance tilts down to the right.

•Turn the right adjusting leg in the direction of the arrow until the appliance is level.

DA99-02116L-14.indb 18

2016. 3. 24. ￿￿ 10:42