REVERSING THE REFRIGERATOR DOOR (CONT’D)

6.Separate the Front leg cover after removing 2 screws.

Screw Front leg cover

7.Unscrew 2 bolts tightening the Bottom hinge and also unscrew a bolt on the left side by the front leg where removed Bottom hinge will be attached.

10mm 10mm

Before removing the Bottom hinge, slightly turn the front legs clockwise for easier disassembling and assembling.

8.Switch the position of the Bottom hinge shaft. Remove the screw on the Auto guide and remove the Bottom hinge shaft with 11mm wrench. Attach the Bottom hinge shaft on the left and put the reversed Auto Guide back.

Screw

Auto guide

Bottom hinge shaft

9.Attach the Bottom hinge on the bottom left side of the refrigerator where a bolt was previously removed in step 8.

Screw remaining bolt on the bottom right side of the refrigerator for the future usage.

10.Switch the side of bottom hinge cap and then attach the Front leg cover on the bottom of the refrigerator.

Bottom hinge cap

11.Switch the side of the Middle hinge cap,

Screw cap and a Screw from left to the right side.

Screw

Middle hinge cap

Screw cap

12.Remove the screw on the bottom right side of the Freezer door.

Switch the Door stopper and the Hinge grommet from the right to the left.

Door stopper

Hinge grommet

13.Switch the Hinge grommet and the Grommet cap on the top of the Freezer door.

Grommet cap

Hinge grommet

setting up _15

UP SETTING 01

DA99-02116L-14.indb 15

2016. 3. 24. ￿￿ 10:42