SELF RECORD USING THE REMOTE CONTROL (SETTING THE SELF TIMER)
•The SELF TIMER function works only in Camera mode. ➥page 18
•When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.
1.Set the Select switch to TAPE.
2.Press the MODE button to set Camera ( 
).
3.Press the SELF TIMER button.
•The ( 
) indicator is displayed.
4.To record movie images, press the Recording start/stop button.
•Self timer starts counting down from 10. At this moment, recording indicator blinks with a beep sound.
•At the last second of the countdown, recording starts automatically.
•If you want to cancel the self timer function before recording, press the SELF TIMER button again.
•Do not obstruct the remote control sensor by putting obstacles between the remote control and miniDV camcorder.
•The remote control maximum range is 4 to 5m (13 to17 ft).
•The effective remote control angle is up to 30 degrees left /right from the center line.
•Using a tripod (not supplied) is recommended during self record.
CARD | TAPE | MODE |
| STBY SP | 0:00:30 |
16:9 Wide | 10Sec | 60min |
10Sec | ||
|
| S 16BIt |
C.Nite 1/30
English _39
