COLOR/BW
In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter.
In low light conditions, IR Filter is turned OFF to the BW Mode and the sensitivity to low light increases to that of a black and white camera. In bright light conditions, the IR Filter is turned ON to the COLOR Mode, and the screen changes to normal as the sensitivity decreases.
COLOR : The IR Filter is ON and the screen is normal.
BW : The IR Filter is OFF and the screen is black and white.
|
| (CAMERA SET) |
|
| |
|
|
|
| ||
|
| CAMERA ID | OFF |
| |
|
| INT |
| ||
|
| COLOR/BW |
| AUTO... |
|
|
| ZOOM SPEED | 3 |
| |
|
| MOTION DET | OFF |
| |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
|
|
(Sensitivity to low light is increased to a level comparable to a black and white camera.)
AUTO : Select to automatically switch between the COLOR mode and BW mode depending on the amount of light. In low light conditions, the IR Filter is turned OFF and the sensitivity to low light is increased by switching to the BW mode, but in bright light conditions, the IR Filter is turned ON and the sensitivity is decreased by switching to the COLOR mode. If you select AUTO and press the ENTER button, a screen from which you can set the BURST ON / OFF, BW LEVEL and DWELL TIME will appear.
-BURST ON : The color burst signal is output together with black and white composite video signal.
-BURST OFF : The color burst signal is not output.
-LEVEL : You can set the brightness level that changes from COLOR mode to BW
mode in 3 steps : LOW, MEDIUM, and HIGH.
-DWELL TIME : Set the HOLDING time for switching between COLOR and BW mode depending the changes in the amount of light. You can set the HOLDING time to 10sec (S), 30sec, 60sec, or 300sec( L).
In AUTO mode, AGC will operates in high speed mode, and you cannot change it manually, as it is indicated by
|
| (CAMERA SET) |
|
| |
|
|
|
| ||
|
| CAMERA ID | OFF |
| |
|
| INT |
| ||
|
| COLOR/BW |
| AUTO... |
|
|
| ZOOM SPEED | 3 |
| |
|
| MOTION DET | OFF |
| |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
|
|
➜
Press
[Enter]
(BW SETUP) |
|
BURST | ON |
LEVEL | MEDIUM |
DWELL TIME | |
RET |
|
Caution : If you use an infrared light source while in AUTO mode, AUTO switching malfunction and camera AF malfunction may occur.
