5.[Figure 5] Match the BRKT-ANCHOR and CAMERA ADAPTER and use 4screws (PH M4 x 8) to assemble them.
6.[Figure 6] Match the 3 holes on the back of the CAMERA and the CONNECTOR and turn it left about 15 degrees.
(Check the sound of LOCKING
and that the LEVER-LOCKING 
is in place)
*Use the screws (BH M3 x L8) to connect the CAMERA and the ADAPTER so they don't move.
7.[Figure 7] Assemble the COVER-DOME onto the DOME.
[Figure 5]
CAMERA ADAPTER
[Figure 6]
15 °
[Figure 7]
