Introduction
❖SCC-C6325
Surface Mount Bracket 
Mounting Hole
Main Body
Lockup Screw
Dome Cover
Main Unit / Surface Mount Bracket
•Dome Cover
Do not remove the protection vinyl from dome cover before fi nishing all installation process to protect dome cover from scratches or dust.
•Surface Mount Bracket
This is used to install the camera directly on the ceiling. After separating this cover, mount this bracket on to ceiling. Main body of the camera is going to be assembled again in the last stage.
Do not use this bracket with wall mount bracket or ceiling mount bracket.
Cabling Terminal
Block
DIP Switch
Back of Main Unit
ENG |
•Lockup Screw
Fixes main unit brackets like surface, wall, and ceiling.
•Cabling Terminal Block
During installation, Power, Video, Communication, Alarm Input cables are connected on to this cabling terminal block.
•DIP Switch
Adjusts camera ID and protocols.
English – 11
