Samsung SCC-C6323, SCC-C6325, SCC-C7325 user manual Preset Setup, Edit Preset Scene

How to use OSD Menu

•AUTO PAN SETUP

Up to 8 Auto Pans are available, which makes camera to move slowly between two preset points.

•PATTERN SETUP

Up to 4 patterns can be stored in the dome.

In this function, path data created by manual move of Joystick are recorded and you can playback the identical path automatically whenever required.

•SCAN SETUP

Up to 8 Scans can be defi ned.

In a Scan, max 20 entities are assigned from any combinations of Preset/Auto Pan/Pattern. If you run a Scan, camera will execute each entry sequentially.

•SCHEDULE SETUP

7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Auto Pan, Pattern and Scan) can be defi ned for each rule. Also, it is possible to use Weekday and Weekend in a rule to make it simple.

PRESET SETUP

PRESET SETUP
PRESET NO.	1
<EDIT SCENE>
<LABEL>	NORTH GATE
CLR PRESET	CANCEL
CAM ADJUST	GENERAL
ALARM OUT	-
BACK
EXIT
• PRESET Number	[1~128]

If a selected preset is already defi ned, camera moves to pre-defi ned position and preset characteristics such as Label and Relay Outputs show on monitor. If a selected preset is not defi ned, “UNDEFINED” shows on monitor.

•EDIT PRESET SCENE

Redefi ne current Preset scene position (i.e. PTZ).

•EDIT PRESET LABEL

Edits Label to show on monitor when preset runs. MAX. 10 alphabets are allowed.

• CLEAR PRESET [CANCEL/OK]

Delete current Preset data

• CAM ADJUST [GENERAL/SPECIAL]

WB(White Balance) and AE(Auto Exposure) can be set up independently for each preset. There are 2 modes, “General” mode & “Special” mode. The General mode means that WB or AE can be set up globally for all presets in “CAMERA SETUP” menu.

The Special mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each Special WB/AE value will be applied when camera arrives to the preset location. During jog operation, General WB/AE value should be applied.

All Special WB/AE value will not be affected by General WB/AE value changes. If “Special’’ is selected, Menu to set WB/AE shows on monitor. Its default is GENERAL.

•ALARM OUT

Relay Output can be linked with Preset run.

The character“-“means disable while the number “1” representing each bit means ON.

Ex) If it is set to “1”, Output relay will be ON whenever you call this Preset.

❖Edit Preset Scene

EDIT SCENE - PRESET 1

MOVE TO TARGET POSITION [NEAR:SELECT/ FAR:CANCEL]

0/0/x1/N

①Using Joystick, move camera to desired position.

②By pressing NEAR or ENTER key, save current PTZ data.

③Press FAR key to cancel.

28 – 10X MINI SMART DOME CAMERA