ALARM IN SET : Select the alarm sensor operation between <NO>, <NC> and <OFF>.
ALARM OUT SET : Set the alarm out port matched to the alarm input port.
AUTO SET : Sets the pattern and scan
| action for the corresponding alarm | ALARM1 | AUTO SET |
| input. When the alarm is generated, the | OFF | |
| ALARM2 | OFF | |
| camera moves to the preset position | ALARM3 | OFF |
| coupled to the corresponding alarm. | ALARM4 | OFF |
| Presets 1 ~ 8 are coupled with alarms | ALARM5 | OFF |
| ALARM6 | OFF | |
| 1 ~ 8 inputs respectively, and the preset | ||
| ALARM7 | OFF | |
| 9 is coupled to the motion detection. | ALARM8 | OFF |
| The camera stops and remains in the | MOTION | OFF |
|
|
| |
| corresponding preset position for the |
|
|
| defined <DWELL TIME>, and performs |
|
|
| pattern or scan action defined by the <AUTO SET>. Setting to <OFF> will | ||
| discard with the pattern or scan action after moving to the preset position. | ||
| - PATTERN 1 ~ 3 : Defined pattern action |
|
|
| - HALF1 : Patterns 1 and 2 in serial action |
|
|
| - HALF2 : Patterns 2 and 3 in serial action |
|
|
| - WHOLE : Patterns 1, 2 and 3 in serial action |
| |
| - SCAN 1 ~ 4 : Predefined SCAN action |
|
|
M | The <ALARM1> is used as external switching signal if the <DAY/NIGHT> is set to | ||
| <EXT>. |
|
|
English
AUX OUT CONTROL : Sets whether to sustain the alarm output despite of the alarm generation or to output alarm out signal while the coupled alarm is alive.
When selected <OFF>, outputs alarm only if the alarm is generated. When selected <ON>, it always outputs alarm out signal despite of the alarm generation.
| AUX OUT CONTROL |
OUT1 | OFF |
OUT2 | OFF |
OUT3 | OFF |
English _43
