Connecting with Other device | Samsung SCC-C6453N specification

Connecting WITH OTHER device

MONITOR

ALARM IN

ALARM OUT

Connecting to a monitor

1. Connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT).

2.Connect the other end of the

connector to the Video Input Terminal of the monitor.

English

CONTROLLER/DVR

POWER SOURCE

Video terminal on the rear of monitor

BNC Cable

English _17

00890A-NA_SCC-C6453N-ENG.indb 17

2009-08-05 오후 3:03:

Image 17

Samsung SCC-C6453N Connecting with Other device, Connecting to a monitor, Video terminal on the rear of monitor BNC Cable

Contents

Smart Dome Camera Overview English Overview FCC Statement Important safety instructions Contents What’s Included Features Frame SET At a GlanceCamera Installation Preparing Installation Insert the cable into the Frame SET, and close the Adaptor Screw Fixing Hole Diagram Protective Tape from on the lens Button Frame SET Cover Camera Camera Address Setup Initial SetupCommunication Protocol Setup Use SW606, SW605, and SW604 to specify the camera address Setting RS-422A/RS-485 Termination Baud Rate SetupUse pins #5, #6 of SW603 to set the baud rate Factory default is 9600 BPS Same address in the network RS-422A/RS-485 Full Duplex Organization Video terminal on the rear of monitor BNC Cable Connecting with Other deviceConnecting to a monitor To connect the controller To connect AlarmTo connect Alarm OUT Adaptor Board Connecting the adaptor cablePower Supply Camera will resume the last run operation How to use the keyboard controllerUsing OSD icons Main Menu  ITS Profile Night Camera SET You can configure the general settings of the camera moduleCamera ID  Location Specify the display position of the camera ID With this, you can adjust the AGC level of a  Manual Adjust the iris level manuallyIris AGC DNR MotionShutter SENS-UP Flickerless You can specify a recording mode according to the sceneXDR DAY/NIGHT SET-AUTO SET are not available Auto Switch or Auto FocusNeeded White BAL DAY/NIGHT Display Zoom Zoom SpeedDisplay P/T Digital Zoom AGC Color SUP SyncReverse POSI/NEGA When multiple motions continue arbitrarily You can enable the motion detection and tracking functionsIntelligent Video Advanced Alarm OUT ResolutionPrivacy Zone Display Preset Select Position and adjust PAN Select the preset number Settings so define them again after the operation Auto Pan SetupAuto SET You can set the Auto PAN, PATTERN, and Auto Play Position Direction Left Endless OFF Speed Select the Start and move the camera using pan/tilt/zoom Pattern SetupScan Setup ~ 511 for Preset Auto Play Setup Select Main MENU-ZONE SET Zone SETYou can set the north direction and the zone coverage Select Main MENU-ALARM SET Alarm SET  Auto SET Sets the pattern and scan Other SET Clock SET Password Factory DefaultsOSD Color Proportional P/T System Info CommunicationYou can check the system information Select Main MENU-SYSTEM Info You can set the language of the user interface Language Function Key Shortcut Keys Specifications Description PAN range 360˚Endless Preset Pan Speed 600˚/sec, maximumManual Pan Speed 0.01˚~ 180˚/sec Tilt range -6˚~186˚ Product Appearance 00890A-NASCC-C6453N-ENG.indb 2009-08-05 오후