Samsung SCC-C7325P, SCC-C6323P, SCC-C6325P manual Pattern Setup, Scan Setup, Edit Pattern, Edit Scan

How to use OSD Menu

PATTERN SETUP

PATTERN SETUP

PATTERN NO. 1 UNDEFINED

CLR PATTERN CANCEL <EDIT PATTERN>

BACK

EXIT

• PATTERN Number [1~4 ]

Selects Pattern number to edit.

If a selected pattern number is not defi ned, “UNDEFINED” will be displayed under selected pattern number.

• CLEAR PATTERN	[CANCEL/OK]
Deletes data in current pattern
• EDIT PATTERN	Starts editing pattern.

❖Edit Pattern

①By using Joystick, move to start position with appropriate zoom. To start pattern recording, press NEAR or ENTER key. To exit this menu, press FAR key.

EDIT PATTERN 1

MOVE TO START POSITION [NEAR:START/ FAR:CANCEL]

0/0/x1/N

②Move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in a selected pattern. The total memory size and the rest memory size is displayed in the form of bar. Maximum 1200 communication commands can be stored in a pattern.

30 – 10X MINI SMART DOME CAMERA

EDIT PATTERN 1

[NEAR:SAVE / FAR:DELETE] 0/0/X1/N

③To save data and exit, press NEAR or ENTER key. To cancel recording and delete record data, press FAR key.

SCAN SETUP

SCAN SETUP
SCAN NO.	1
	UNDEFINED
CLEAR SCAN	CANCEL
<EDIT SCAN>

BACK

EXIT

• SCAN Number [1~8]

Selects Scan number to edit.

If a selected Scan number is not defi ned, “UNDEFINED” will be displayed under selected Scan number.

• CLEAR SCAN	[CANCEL/OK]
Deletes data in current Scan
• EDIT SCAN	Starts editing Scan.

❖Edit Scan

①Press NEAR or ENTER key in “NO” list to start Scan setup.

EDIT SCAN 1

NO. ACTION NO. DWELL OPT

1 NONE

2NONE

3NONE

4NONE

5NONE

SAVE

CANCEL [NEAR:EDIT]