Yamaha HTR-6090 owner manual 103 En, Notes, 3Press ENTER, 5Press ENTER to set the number

Models: HTR-6090

1 152
Download 152 pages 19.65 Kb
Page 107
Image 107
3Press ENTER.

2Press and hold LEARN for about 3 seconds using a ballpoint pen or similar object.

The library name (ex. L;DVD) and the name of the selected input area (ex. DVD) appear alternately in the display window on the remote control.

LEARN

y

You can set a remote control code of a different type of component to an input area. Press l / h repeatedly to change the library (component category).

Library choices: L;DVD, L;DVR, L;LD, L;CD, L;CDR, L;MD, L;TAP (tape), L;TUN (tuner), L;AMP, L;TV, L;CAB (cable), L;SAT (satellite), L;VCR

If you want to setup for another input area, press the input selector button or 5Press ENTER to set the number. , or press SELECT k/ nrepeatedly to select the input area.

Notes

Be sure to press and hold LEARN for at least 3 seconds, otherwise the learning process will start.

If you do not complete each of the following steps within 30 seconds, the setting mode will be automatically canceled. In this case, start over from step 2.

3Press ENTER.

The four-digit code set for the selected component appears in the display window.

Note

0000 appears in the display window if no code has been set.

REMOTE CONTROL FEATURES

4Press the numeric buttons to enter the four- digit remote control code for the component you want to use.

For a complete list of available remote control codes, refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual.

CLASSICAL LIVE/CLUB ENTERTAIN MOVIE

1 2 3 46Press LEARN again to exit from the setup mode.

STEREO SUR. DECODE SELECT EXTD SUR.

5 6 7 8

90

5Press ENTER to set the number.

“OK” appears in the display window on the remote control if setting was successful.

“NG” appears in the display window on the remote control if the setting was unsuccessful. In this case, start over from step 3.

y

If you continuously want to set up another code for another

component, press the input selector button or 103 En , or SELECT k / n repeatedly to select the component, then

repeat steps 2 through 5.

6Press LEARN again to exit from the setup mode.

LEARN

7Press p or AV POWER to confirm whether you can control your component using the remote control.

POWER

orAV

y

If operation is not possible and the manufacturer of your component has more than one code, try each of them until you find the correct one.

Notes

“ERROR” appears in the display window on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.

The supplied remote control does not contain all possible codes for commercially available audio and video components (including YAMAHA components). If operation is not possible with any of the remote control codes, program the new remote control function using the learn feature (see “Programming codes from other remote controls” on page 104) or use the remote control supplied with the component.

Functions programmed using the learn feature take priority over remote control code functions.

OPERATION

ADVANCED

 

 

103 En

Page 107
Image 107
Yamaha HTR-6090 owner manual 103 En, Notes, 3Press ENTER, 5Press ENTER to set the number