Yamaha HTR-6090 owner manual Controlling Zone, 113 En, Using the internal amplifiers of this unit

Models: HTR-6090

1 152
Download 152 pages 19.65 Kb
Page 117
Image 117
■Using the internal amplifiers of this unit

USING MULTI-ZONE CONFIGURATION

Using the internal amplifiers of this unit

IMPORTANT SAFETY NOTICE

The SP1 speaker terminals of this Receiver should not be connected to a Passive Loudspeaker Selector Box or more than one loudspeaker per channel.

Connection to a Passive Loudspeaker Selector Box or multiple speakers per channel could create an abnormally low impedance load resulting in amplifier damage. See this owner’s manual for correct usage.

Compliance with minimum speaker impedance information for all channels must be maintained at all times. This information is found on the back panel of your Receiver.

Connect the Zone 2 speakers directly to the SP1 speaker terminals and select “[SP1]” for “ZONE2 AMP” (see page 99).

R +

R +

Second room

(Zone 2)

Controlling Zone 2

You can select Zone 2 by using the control buttons on the front panel or on the remote control.

Selecting Zone 2

Front panel operations

1Press ZONE 2 ON/OFF on the front panel to individually turn on or off Zone 2.

ZONE 2

ON/OFF

y

Once MASTER ON/OFF on the front panel is pressed inward to the ON position, you can also press POWER and STANDBY on the remote control to turn on the main zone and Zone 2.

SP1

 

 

PRESENCE

+

L

SURROUND BACK/

 

 

BI-AMP

+

L

 

SINGLE

 

This unit

2Press ZONE 2 CONTROLS on the front panel to activate the Zone 2 control mode.

While this unit is in the Zone 2 control mode, the ZONE2 indicator flashes.

ZONE 2

CONTROLS

ZONE2

Flashes

In the Zone 2 control mode, you can perform the following operation in Zone 2.

Adjusting the tonality of Zone 2

Adjusting the balance of the speaker level in Zone 2

AM, FM or XM Satellite Radio tuning in Zone 2

y

This unit automatically exits the Zone 2 control mode after approximately 5 seconds from the last operation is performed.

See page 115 for details about the Zone 2 input select mode.

See page 115 for details about the Zone 2 volume control mode.

OPERATION

ADVANCED

 

 

113 En

Page 117
Image 117
Yamaha HTR-6090 owner manual Controlling Zone, 113 En, Using the internal amplifiers of this unit, Selecting Zone