Yamaha HTR-6090 owner manual Hdock SET, 99 En, XM Radio setting GXM Radio SET

	CUSTOMIZING THIS UNIT (MANUAL SETUP)
■ Zone set F)ZONE SET	■ XM Radio setting G)XM RADIO SET

F)ZONE SET		G)XM RADIO SET
. ZONE2 VOL;;;;VAR		.;;NONE
ZONE2 AMP;;;;EXT
p	p
p	[

Zone 2 volume ZONE2 VOL

Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks.

Choices: VAR, FIX

•Select “VAR” to adjust the ZONE 2 OUTPUT volume simultaneously with VOLUME +/– on the remote control.

•Select “FIX” to fix the ZONE 2 OUTPUT volume level to a standard line level.

Zone 2 amplifier ZONE2 AMP

Use to select how the ZONE 2 speakers are amplified. Choices: EXT, [SP1]

•Select “EXT” if you want to connect your Zone 2 speakers through an external amplifier connected to the ZONE 2 OUTPUT jacks on the rear panel of this unit.

•Select “[SP1]” to use the internal surround back amplifier of this unit when you want to connect your Zone 2 speakers directly to the SP1 speaker terminals on the rear panel of this unit.

Notes

•When “BI-AMP” is set to “ON” in the “ADVANCED SETUP” menu, “[SP1]” cannot be selected.

•When you use internal amplifiers for Zone 2, some surround field programs may not work in the same way as when you do not use the internal amplifiers for Zone 2.

XM Radio antenna XM ANTENNA

Use this feature to check the current reception level of the XM Passport System connected to the XM jack of this unit (see page 60). For the best reception, orient the XM Passport System so that a value of 60% or more is displayed here.

Display status: NONE, 0 to 100%

Notes

•“NONE” is displayed if the XM Passport System is not connected to this unit. In this case, check the antenna connections (see page 60).

•The “XM ANTENNA” parameter cannot be adjusted by using the remote control. Instead, you need to adjust the orientation of the XM Passport System connected to the XM jack of this unit for a better percentage of the reception level.

■Dock set H)DOCK SET

H)DOCK SET

.;AUTO
)	)

Charge on standby STANDBY CHRG

Use this feature to select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode (see page 72).

Choices: AUTO, OFF

•Select “AUTO” to charge the battery of the stationed iPod when this unit is turned on and in the standby mode.

•Select “OFF” to charge the battery of the stationed

iPod only when this unit is turned on.

OPERATION ADVANCED

99 En