Yamaha HTR-6090 115 En, Selecting the input source of Zone, Adjusting the volume level of Zone

	USING MULTI-ZONE CONFIGURATION
■ Selecting the input source of Zone 2	■ Adjusting the volume level of Zone 2

Press ZONE 2 INPUT to activate the Zone 2 input select mode and then rotate the INPUT selector on the front panel (or set the operation mode selector to AMP and then press one of the input selector buttons on the remote control) to select the input source of the selected zone.

If the remote control is used to select the input source, “2: name of the selected input source” is displayed in the display window on the remote control when Zone 2 is selected respectively.

INPUT

ZONE 2

INPUT

Press ZONE 2 VOLUME to activate the Zone 2 volume control mode and then rotate VOLUME on the front panel (or set the control mode of the remote control to “ZONE 2” (see page 114) and then press VOLUME +/–) to adjust the volume level of the selected zone.

ZONE 2 VOLUME

or

VOLUME

or

	XM
AMP
	PHONO	TUNER	CD	MULTI CH IN
SOURCE	V-AUX/DOCK	CBL/SAT	MD/TAPE	CD-R
TV	DTV	VCR 1	DVR/VCR 2	DVD

•Select TUNER as the input source to use the TUNER features in the selected zone. For details about the TUNER operations, see “FM/AM TUNING” on page 53.

•Select XM as the input source to use the XM Satellite Radio features in the selected zone. For details about the XM Satellite Radio operations, see “XM SATELLITE RADIO TUNING” on page 60.

Note

The selected input source is shared across all zones.

y

You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE 2 INPUT on the front panel again.

+

VOLUME

–

Front panel Remote control

y

Press MUTE on the remote control to mute the sound output to the selected zone.

Note

When you use the external amplifiers in Zone 2, VOLUME +/– can be used only when “ZONE2 VOL” is set to “VAR” in “ZONE SET” (see page 99).

OPERATION ADVANCED

115 En