Yamaha HTR-6090 owner manual Autocheck, Resultexit, 33 En

Volume level LEVEL

Checks and adjusts the volume level of each speaker. Choices: CHECK, SKIP

•Select “CHECK” to automatically check and adjust this item.

•Select “SKIP” to skip this item and perform no adjustments.

8Press n to select “START” and then press

ENTER to start the setup procedure.

This unit starts the auto setup procedure. Loud test tones are output from each speaker during the auto setup procedure. Once all items are set, the “RESULT:EXIT” display appears in the OSD.

AUTO SETUP

The results displayed under “RESULT” are as follows.

Number of speakers SP

Displays the number of speakers connected to this unit in the following order: Front/Back/Subwoofer

Speaker distance DIST

Displays the speaker distance from the listening position in the following order:

Closest speaker distance/Farthest speaker distance

Speaker level LVL

Displays the speaker output level in the following order:

PRESET/CH

ENTER

PRESET/CH

ENTER

Lowest speaker output level/Highest speaker output level

Notes

PREPARATION

A-E/CAT.

A-E/CAT.

• If “E-10:INTERNAL ERROR” appears during the testing

procedure, restart from step 4.

• If you selected “RELOAD” in step 4, no test tones are

output.

• If an error occurs during the “AUTO:CHECK” procedure,

Notes

•During the auto setup procedure, do not perform any operation on this unit.

•We recommend getting out of the room while this unit is in the auto setup procedure. It takes approximately 3 minutes for this unit to complete the auto setup procedure.

The display changes as follows.

1 AUTO:MENU

;;;;;;;AUTO

;;;;;CHECK

;;;CHECK

;;;;;;;CHECK

;;;;;;;NATURAL

;;;;;;CHECK

.START

p p

p[

2 AUTO:CHECK

INITIALIZING

.CHECK

MAIN CHECK EQUALIZING LEVEL

CHECK CH=CENTER

;;;;;;;;

p

RESULT:EXIT

.RESULT

. SP : 5/4/0.1

.DIST: 14.0/ 17.0ft

.LVL : -9.0/ +6.5dB

[SET CANCEL

p p

the setup procedure is canceled and an error screen

appears. For details, see “If an error screen appears” on

page 35.

• When this unit detects potential problems during the

“AUTO SETUP” procedure, “WARNING” and the

number of warning messages appears in the above of

“RESULT” (see page 36).

• Depending on the listening environment, “SWFR

PHASE:REV” appears during the “AUTO:CHECK”

procedure and “SUBWOOFER PHASE” in “SOUND

MENU” (see page 88) is automatically set to

“REVERSE”.

33 En