Yamaha HTR-6090 owner manual 116 En, Adjusting the tonal quality of Zone

USING MULTI-ZONE CONFIGURATION

■Adjusting the balance of the speaker level in Zone 2

1Press ZONE 2 CONTROLS on the front panel to activate the Zone 2 control mode.

ZONE 2

CONTROLS

2Press TONE CONTROL repeatedly to select “BALANCE” and then rotate PROGRAM on the front panel to adjust the balance of the front left and right speaker level of the selected zone.

PROGRAM

TONE CONTROL

■Adjusting the tonal quality of Zone 2

1Set the operation mode selector to AMP and then press SELECT k repeatedly to select “ZONE 2”.

“ZONE 2” is displayed in the display window on the remote control.

AMP

SOURCE

SELECT

TV

2Set the operation mode selector to AMP and then press CH +/– on the remote control to adjust the high-frequency response (TREBLE) or TV VOL +/– to adjust the low-frequency response (BASS) respectively.

++

TV VOL CH

––

BASSTREBLE

y

You can also adjust the tonal quality of Zone 2 by using TONE CONTROL on the front panel. For details, see “Adjusting the tonal quality” on page 49.

Note

Check that “ZONE 2” is displayed in the display window of the remote control before you adjust the tonal quality of the corresponding zone (see page 114).

116 En