Yamaha HTR-6090 owner manual Selecting audio input jacks, 39 En, Auto

Selecting audio input jacks

(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (Audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source.

y

•We recommend setting Audio input jack select to “AUTO” in most cases.

•You can adjust the default Audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 98).

1Rotate the INPUT selector on the front panel (or press one of the input selector buttons on the remote control) to select the desired input source.

INPUT PHONO CD MULTI CH IN

	or	V-AUX/DOCK CBL/SAT MD/TAPE	CD-R
		DTV VCR 1 DVR/VCR 2	DVD
Front panel		Remote control

2Press AUDIO SELECT on the front panel (or AUDIO SEL on the remote control) repeatedly to select the desired Audio input jack select setting.

AUDIO SELECT

AUDIO SEL

or

Available input sources

V-AUX DVR/VCR 2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD-R CD PHONO MULTI CH TUNER XM

A.SEL: AUTO

Currently selected Audio input jack select setting

		PLAYBACK
AUTO	Automatically selects input signals in
	the following order:
	(1) HDMI
	(2)	Digital signals
	(3)	Analog signals

HDMI Selects only HDMI signals. When HDMI signals are not input, no sound is output.

COAX/OPT Automatically selects input signals in the following order:

(1)Digital signals input at the COAXIAL jack.

(2)Digital signals input at the

OPTICAL jack.

When no signals are input, no sound is output.

ANALOG Selects only analog signals. If no analog signals are input, no sound is output.

Note

This feature is not available when no digital input jack (OPTICAL, COAXIAL and HDMI) are assigned. In addition, HDMI is not available as an Audio input jack select setting when the HDMI IN 1 and HDMI IN 2 jacks are not used. Use “I/O ASSIGNMENT” in “INPUT MENU” to reassign the respective input jack (see page 93).

OPERATION BASIC

39 En