Yamaha HTR-6090 Bmemory Guard, Caudio Select, Eparam. Ini, 98 En, Ddecoder Mode, Notes

CUSTOMIZING THIS UNIT (MANUAL SETUP)

■Memory guard B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON

B)MEMORY GUARD

[

p[

•Select “OFF” to turn off the “MEMORY GUARD” feature.

•Select “ON” to protect:

–DSP sound field program parameters

–all “SET MENU” items

–all speaker levels

Note

When “MEMORY GUARD” is set to “ON”, you cannot select and adjust any other “SET MENU” items.

■Audio select C)AUDIO SELECT

Use this feature to designate the default input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

C)AUDIO SELECT

[AUTO LAST

p]/[[]:Adjust

•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate input mode.

•Select “LAST” if you want this unit to automatically select the last input mode used for the connected input source.

Note

Selecting “LAST” does not recall the last setting for the EXTD SUR. button on the remote control.

■Decoder mode D)DECODER MODE

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

D)DECODER MODE

[AUTO LAST

p]/[[]:Adjust

•Select “AUTO” to if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

•Select “LAST” to if you want this unit to automatically select the last decoder mode used the connected input source.

Note

Selecting “LAST” does not recall the last setting for the EXTD SUR. button on the remote control.

■Parameter initialization E)PARAM.INI

Use this feature to initialize the parameters of each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial factory settings.

Press the corresponding sound field program selector buttons on the remote control to select the sound field program that you want to initialize.

An asterisk (*) appears to the left of the sound field program names that have been changed from their initial factory settings.

Choices: CLASSICAL, LIVE/CLUB,

ENTERTAINMENT, MOVIE, STEREO, SURROUND DECODE

E)PARAM. INI

CLASSICAL *LIVE/CLUB

ENTERTAINMENT *MOVIE

Press DSP key

Notes

•You cannot automatically revert to the previous parameter settings once you initialize a sound field program group.

•You cannot separately initialize individual sound field programs.

•You cannot initialize any sound field program groups when “MEMORY GUARD” is set to “ON” (see page 98).

98 En