Yamaha HTR-6090 owner manual 81 En, Selecting decoders used with sound field programs

	ADVANCED SOUND CONFIGURATIONS
Decoder parameter descriptions
Decoder parameter	Features
PRO LOGIC IIx Music	Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as
PRO LOGIC II Music	well as the front speakers for a wraparound effect.
PANORAMA	Choices: OFF, ON
PRO LOGIC IIx Music	Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front
PRO LOGIC II Music	or towards the rear.
DIMENSION
	Control range: –3 (towards the rear) to +3 (towards the front)
	Initial setting: STD (standard)
PRO LOGIC IIx Music	Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely
PRO LOGIC II Music	towards the center speaker or towards the front left and right speakers. A larger value moves the center
	channel output towards the front left and right speakers.
CENTER WIDTH
	Control range: 0 (center channel sound is output only from the center speaker) to
	7 (center channel sound is output only from the front left and right speakers)
	Initial setting: 3
DTS Neo:6 Music	DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center
C.IMAGE	channel to make the center channel more or less dominant as necessary.

Control range: 0.0 to 1.0

Initial setting: 0.3

Available decoders

■Selecting decoders used with sound

field programs

Use this feature to select the desired decoder used with MOVIE sound field programs (except “Mono Movie”). See page 46 for details about MOVIE sound field program.

1Set the operation mode selector to AMP and then press MOVIE on the remote control repeatedly to select the desired MOVIE sound field programs.

AMP

MOVIE

SOURCE

4

Decoder	Functions
PRO LOGIC	Dolby Pro Logic processing for
	any sources
	Dolby Pro Logic IIx (or Dolby
PLIIx Movie	Pro Logic II) processing for
	movie sources. The Pro Logic IIx
PLII Movie	decoder is not available when “SB
	L/R SP” is set to “NONE” (see
	page 88).
Neo:6 Cinema	DTS processing for movie
	sources

OPERATION ADVANCED

TV

2Press SELECT repeatedly to select the desired decoder used with the selected sound field program.

You can select from the following decoders depending on the type of source you are playing and your personal preference.

y

You can select the desired decoder by pressing SELECT and then press l / h repeatedly on the remote control.

81 En