Yamaha HTR-6090 owner manual Sound Field Programs, Selecting sound field programs, 43 En, Notes

SOUND FIELD PROGRAMS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

y

•When you set the “DECODER MODE” parameter in “INPUT MENU” to “AUTO”, this unit selects the appropriate digital decoder according to the input signal.

•The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.

•The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from the front, back, left and right.

•You can change sound field parameters. See page 75 for details.

Selecting sound field programs

Notes

•When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

•Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 40) and Audio input jack select is set to “ANALOG” (see page 39).

•When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies the selected program and Audio input jack select is set to “ANALOG” (see page 39).

•When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the DTS 96/24 decoder.

•Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.

■ Front panel operations ■ Remote control operations

OPERATION BASIC

+

+

+

AMP

SOURCE

TV VOL

CH

VOLUME

VOLUME

TV

–

–

–

MAIN ZONE

ZONE 2

ZONE 2

CONTROLS

TV MUTE

TV INPUT

MUTE

ON/OFF

ON/OFF

PRESET/CH

LEVEL

SET MENU

PURE DIRECT

ON

TITLE

MENU

OFF

PRESET/TUNING

FM/AM

A/B/C/D/E

PRESET/TUNING/CH

MEMORY

TUNINIG MODE

MASTER

SEARCHMODE

CATEGORY

DISPLAY

SRCH MODE

OPTIMIZER MIC

EDIT

PROGRAM

INPUT

ENTER

AUDIO

VIDEO AUX

PHONES

ENHANCER

NIGHT

PURE DIRECT STRAIGHT

TONE CONTROL

AUDIO SELECT

ZONE 2

ZONE 2 VOLUME

A-E/CAT.

INPUT

PARAMETER

STRAIGHT

SILENT CINEMA

EFFECT

RETURN

DISPLAY

XM MEMORY

EFFECT

CLASSICAL

LIVE/CLUB

ENTERTAIN

MOVIE

1

2

3

4

STEREO

SUR. DECODE

SELECT

EXTD SUR.

5

6

7

8

PROGRAM selector

NIGHT

ENHANCER

9

0

+10

ENT

AMP

Sound field program selector buttons

Rotate the PROGRAM selector on the front panel.

The name of the selected sound field program appears in the front panel display and in the OSD.

Set the operation mode selector to AMP and then press one of the sound field program selector buttons on the remote control repeatedly.

The name of the selected sound field program appears in the front panel display and in the OSD.

43 En