Yamaha HTR-6090 owner manual 114 En, Turning on or off Zone 2 using the remote control, Notes

USING MULTI-ZONE CONFIGURATION

3Refer to “Selecting the input source of Zone 2”, “Adjusting the volume level of Zone 2”, “Adjusting the balance of the speaker level in Zone 2” or “Adjusting the tonal quality of Zone 2” on page 116 to perform further operations.

Remote control operations

1Set the operation mode selector to AMP and then press SELECT k repeatedly to select “ZONE 2”.

“ZONE 2” is displayed in the display window on the remote control.

AMP

SOURCE

SELECT

TV

■Turning on or off Zone 2 using the

remote control

POWER and STANDBY on the remote control work differently depending on the selected zone that appears in the display window on the remote control.

•When the main zone or Zone 2 mode is selected, you can turn on the main zone or Zone 2 or set them to the standby mode individually.

•When the all mode is selected, pressing POWER turns on the main zone or Zone 2 simultaneously and pressing STANDBY sets them to the standby mode simultaneously.

		POWER
Control mode	Display window	and
		STANDBY
Main zone	Name of the selected	Turns on the main
		zone only or sets it to
mode	input area
		the standby mode.
Zone 2 mode	“ZONE 2” or “2;name	Turns on Zone 2 or
	of the selected input	sets it to the standby
	area”	mode.
		POWER: turns on
		the main zone and
All mode		Zone 2.
	“ALL”	STANDBY: sets the
		main zone and Zone
		2 to the standby
		mode.

2Refer to “Selecting the input source of Zone 2”, “Adjusting the volume level of Zone 2”, “Adjusting the balance of the speaker level in Zone 2” or “Adjusting the tonal quality of Zone 2” on page 116 to perform further operations.

3Press SELECT k / n to exit from the Zone 2 mode.

Notes

•When the remote control is in the main zone mode, “MAIN” appears for a few seconds when POWER or STANDBY is pressed.

•“ALL” appears in the display window on the remote control only when SELECT n is pressed.

114 En