Samsung SCLSeries manual Scratch tool, Chip, Pressure R0.5

NO	ITEMS				TEST CONDITION				PERFORMANCE
		A STATIC LAOD OF 19.6N USING A R0.5 SCRATCH							THERE SHALL BE NO
		TOLL SHALL BE APPLIED ON THE CORE OF THE							EVIDENCE OF
		COMPONENT AND IN THE DIRECTION OF THE ARROW							MECHANICAL DAMAGE.
		AND HOLD FOR 5 SEC. THE TEST BOARD SHALL BE							ELECTRICAL
		IEC 40(S)541. HOWEVER THE BASE MATERIAL SHALL							CHARACTERISTICS
		BE G-10 or FR-4 (ANSI GRADE)							SHALL SATISFY THE
								Board	INITIAL REQUIREMENT.
	ADHESION			Scratch tool					IF THERE ARE
	(ELECTRODE								ELECTRODES ON BOTH
10
	PEELING		R0.5						SURFACES, IT SHALL
	STRENGTH)								SATISFY THE ABOVE
									REQUIREMENT ON
									WHICHEVER SURFACE
									IT MAY BE FIXATED ON.
				Chip
						Chip
		A ROD OF 9.8N USING A R0.5 PRESSURE ROD SHALL							THERE SHALL BE NO
		BE APPLIED TH THE CENTER IN THE DIRECTION OF							EVIDENCE OF
		THE ARROW AND HOLD FOR 10 SEC							MECHANICAL DAMAGE.
									ELECTRICAL
									CHARACTERISTICS
				Pressure			R0.5		SHALL SATISFY THE
	CORE BODY								INITIAL REQUIREMENT.
11								Chip
	STRENGTH

W

0.5L

L

L＞W

SCL Series