COLOR CCD CAMERA User Guide
14
COLOR CCD CAMERA User Guide
15
•
Whenmakingacontrolsystemtocontrolthe camera,pleaseusetothe
protocol(SAMSUNG-T,SAMSUNG-E,PELCO-P,PELCO-D,VICON,PANASONIC,BOSCH,
HONEYELL).
•WhenyouconnectingtoRS-485CONTROL TERMINAL, please peel off the outer
skininsidetheRS-485CONTROLTERMINAL.
•
IncaseofSCC-101 connection,changecommunicationmodeto『8-E-1』at 『Communication
configuration』menu.(Formoreinformation,refertoSCC-101manual.)
Notes

Using Coaxial Communications

DVD
• Coaxial Communications System
• OSD Control method
DVR
Distance
Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
– Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
•Ifthecameraiscontrolledthroughcoaxialcommunication,pleaseuseavideoamp
intendedforcoaxialcommunications. Regularvideoampsdo nottransfercoaxial
signals.

Notes

Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG
TECHWIN System Controller or DVR.
(1) Connection to a PC.
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485
CONTROL CABLE

Connecting to RS-485 Control Cable

CONTROL CABLE SPEC
WHITE (TRX+) RS-485+
BLUE (TRX-) RS-485-
* RS-485 Communication establishment initial value
485 Control Board Connection Port RS-485 Control Port
(+) CONNECTION TERMINAL WHITE (TRX+)
(-) CONNECTION TERMINAL BLUE (TRX-)
Item Camera ID BAUD RATE UART MODE RET PKT
Initial value
19600 8-NONE-1 ENABLE
(2) Connection to a DVR or System Controller.
Connect the RS-485 cable to the connection ports of the DVR or System Controller.
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT

RS-485 communication control

Connection
• :BNC
•----:RS-485