![](/images/new-backgrounds/1295856/29585621x1.webp)
Operating Your Camera
2.Select a desired mode using the Function Setup Switch.
OFF : Not being used
BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the
-LEVEL : Adjust level of the HLC function.(LOW,MIDDLE,HIGH)
-MASK TONE : Change the brightness
-LIMIT : Enable to change the operating condition.
3.Select a desired mode using the Function Setup switch and press the Function Setup switch.
• Select ‘BLC’ to adjust the area to be | • HLC : Enable the user to change the level, | |||||||||
enhanced then adjust the level. |
| mask tone area. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes
•For effective viewing of license plates, there is a minimum required illumination and the shutter speed needs to be faster than 1/200sec.
•Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance.
•When dark, the HLC is only activated when a bright light exceeding a specific size. (In NIGHT ONLY mode.)
•The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode.)
•The HLC is not activated when the
Motion Detection
This product has a feature that will detect movements of objects in 8 different areas on the screen. The camera detects an object’s movement by sensing disparity of outline, brightness levels and color. The camera sends a detection signal out via the MD output terminal and will zoom into a
MAIN | SETUP |
SSDR | ON |
WHITE BAL | ATW |
BACKLIGHT | OFF |
MOTION DET | OFF |
FOCUS |
|
1. Please press the Function Setup Switch.
OFF : MOTION DETECTION mode is cancelled.
ON : Any motion in the selected areas is observed.
• AREA SEL : You can select 8 different sensitivity MOTION DET area.
| MOTION DET SENSTIVITY | ||||
AREA1 |
|
|
|
| AREA8 |
MIN |
|
|
|
| MAX |
|
|
|
|
•AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
•SEL POS(XPOS/YPOS) : You can control MD area size.
•SMART ZOOM : Smart zoom is operated in connection
with MOTION DETECTION. When the SMART ZOOM function is ‘ON’ while the MOTION DETECTION mode is ‘ON’, the zoom goes to the TARGET ZOOM position once motion is detected. Once the zoom action is finished and ‘DWELL TIME’ has passed, the zoom returns to the ‘START ZOOM’ position.
COLOR CCD CAMERA 20 User Guide | COLOR CCD CAMERA 21 User Guide |