Operating Your Camera

-START ZOOM : By moving the left or right direction of the Function Setup Switch in the ‘START ZOOM’ item to select the zoom position from 1x to 12x to be returned after the ‘SMART ZOOM’ action is over.

-TARGET ZOOM : By moving the left or right direction of the Function Setup Switch in the ‘TARGET ZOOM’ item to select the zoom position from 1x to 12x to be used during MOTION DETECTION.

-DWELL TIME : By moving the left or right direction of the Function Setup Switch in the ‘DWELL TIME’ item to select a time between 5 and 60 seconds for the dwell time before the zoom is returned to the ‘START ZOOM’ position. (5,7,10,15,20,30,40,60 sec)

Notes

Tips on Using the Motion Detection Feature

• The feature may not function properly under flickering light conditions.

• The camera interprets sudden changes in lighting and subsequent change in

brightness of an object as motion.

FOCUS

MAIN

SETUP

SSDR

ON

WHITE BAL

ATW

BACKLIGHT

OFF

MOTION DET

OFF

FOCUS

 

EXPOSURE

 

1.Press the Function Setup Switch to access the main setup menu and then position the indicator over FOCUS moving the up or down direction of Function Setup Switch.

2.Press the Function Setup Switch.

MODE : You can select the most suitable zoom mode. Move the arrow indicator to

’MODE‘ by moving the up or down direction of the Function Setup Switch

• With the feature enabled, other algorithms may require additional time to operate.

• This system does not guarantee prevention of fire or theft. The manufacturer shall not

be held responsible for any accident or damage incurred.

• Connect an external alarm device to MD Out on back of the camera.

FOCUS SETUP

MODE

ONE-PUSH

ZOOM TRACK

AUTO TRACK

ZOOM SPEED

FAST

D-ZOOM

OFF

ZOOM POS INIT

OFF

USER PRESET

OFF

LENS INIT

MANUAL

RETURN

 

-ONE PUSH : Focus is automatically adjusted just once, after zoom position is changed. Select 'ONE PUSH' and press the Function Setup Switch to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions by moving the directional key of Function Setup Switch while verifying the changes on screen. Press the Function Setup Switch once the desired image quality is obtained.

ZOOM/FOCUS POS SETUP

: TELE : WIDE

: NEAR : FAR

COLOR CCD CAMERA 22 User Guide

COLOR CCD CAMERA 23 User Guide

Page 12
Image 12
Samsung SCO-2120R manual Focus