COLOR CCD CAMERA User Guide
12
COLOR CCD CAMERA User Guide
13

Connecting to Monitor

Please connect the video output terminal located on the back of the camera to the
monitor.
CCDCamera
CCDCamera
Intermediate Endmonitor
Monitor
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and
select 75Ω for the Intermediate device as shown in the picture below.
Connection
The recommended adaptor specification for SCO-2120RN/P is DC 12V/4A, AC
24V/1A over.
Please check the standard power requirement before connecting the power.

Connecting to Power

Whentheresistancevalueofcopperwireisat[20°C(68°F)]
Copperwiresize(AWG) #24(0.22mm2)#22(0.33mm2)#20(0.52mm2)#18(0.83mm2)
Resistancevalue(Ω/m) 0.078 0.050 0.030 0.018
Voltagedrop(V/m) 0.028 0.018 0.011 0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore having an excessively long distance between the power adaptor and the
camera may affect the camera's performance.
✽Standardvoltageforcameraoperation:DC12V±10%/AC24V±10%
✽Theremaybesomedeviationinvoltagedropdependingonthetypeofwireandthemanufacturer.
•Pleaseuseapoweradaptorthatmeetstherequiredstandards.
•Pleaseconnectthepowerafterinstallation.
Notes