Samsung SDE-3003, SDE-3001 Setting the Device, Setting the Camera, Press Enter button

using the DVR

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

1.Press the [MENU] button on the remote control.

2.Use the left/right button (◄ ►) to select <Device>. Device setting menu is selected.

3. Use the up/down buttons (	) to move to <Camera>,
and press [ENTER] button.

Logout

Device

Camera

Storage Device

Remote Device

Monitor

Return

4.Select <Camera>.

You will see a window where you can configure the camera settings including Video, Audio, CH Name, SEQ- Dwell Time.

5. Use direction buttons (	) to move to a desired
item, and set the value.

•Video

-<ON/OFF> : You can turn ON/OFF the selected channel’s camera.

Camera

Camera

CH	Video 		Audio 		CH Name	SEQ-Dwell Time 
1	ON		OFF		CAM 01	5 sec	
2	ON		OFF		CAM 02	5 sec	
3	ON		OFF		CAM 03	5 sec	
4	ON		OFF		CAM 04	5 sec	

Screen Setup

OK Cancel

-<Covert1> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

•Audio

-If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

-For SEB-1006R (MIC integrated camera), you must connect it to CH1 and set CH1 Audio to “ON” in the Camera menu.

Audio output is available for only CH1.

42_ using the DVR