Samsung SDE-3001, SDE-3003, 4 CHANNEL DVR Setting the Monitor, Setting Display position

using the DVR

Monitor

You can select which item(s) to be displayed on the screen.

Setting the Monitor

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
	Select <Monitor>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.

If selected <Continuous>, it displays the channel until you press [ALARM] button to release it.

•Display : Displays only checked items on the monitor screen.

4.When the monitor setup is done, press <OK>.

Monitor
Monitor	Spot Out	Mode
 Event Display	OFF
 Display	Date	Time	CH Name	Icon
Display Position Setup
	OK	Cancel

Setting Display position

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data.

1.In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER] button.

2.Select the <Monitor> item.

3.Select <Display Position Setup> in the bottom.

You will move to the <Display Position Setup> window.

4.Use the four direction buttons or the number buttons on the remote control to adjust the data position.

2011-01-01 01:10:25
Display Position Setup
	30
30	30
	30
OK	Cancel

46_ using the DVR