setup & application
Setting the USB TWAIN
The USB TWAIN mode is available if you use the USB cable to connect between presenter and PC that has installed a graphic application in compliance with TWAIN (ex: Photoshop (Except CS5), ACDSEE, MS Office word 2003, etc).
1. From the menu, select CONFIGURATION USB TWAIN.
PRESENTER CONFIGURATION
FREEZE | ALL DISPLAY |
USB TWAIN | DISABLED |
PROTOCOL | 10BYTE |
NTSC | |
SYSTEM INFO. | } |
SYSTEM RESET | } |
Return } |
|
2. To activate TWAIN, set it to ENABLED.
MM `` For more information, refer to the relevant section of the application program’s user manual.
`` TWAIN can be performed even if USB TWAIN is set to DISABLED, where only a specific resolution of video can be played properly.
If you want to use other than 320x240 and 640x480, set USB TWAIN to ENABLED under the CONFIGURATION menu.
22_ setup & application
