installation & connection
14_ installation & connection

Connecting to the pC

To connect the presenter and PC, use USB or RS-232C cable.
Using USB cable enables control as well as video transfer, while RS-232C only enables control as
defined in the protocol.

Connecting a pC with uSB Cable

1. Connect the cable to the USB port of the PC.
2. Connect the USB cable’s the other end to the presenter’s [USB] port.
J
`It is recommended to connect the USB cable to the USB port on the main board of your PC.
(Using an extension front port or the bus-power USB hub may cause a problem, depending on the manufacturer.)
Use only the USB cable of less than 4.0m in length.
`Use the USB cable provided by Samsung Techwin.
(Using a cable from different manufacturer may cause problem depending on the cable specifications.)
`If using the USB cable for the connection, install the provided USB driver and SDP USB Viewer on your PC.
For more information, refer to the provided program manual.
DC 5V IN
RS-232C USB C-VIDEO VGA OUT
USB
USB Cable
PC
Digital Presenter