appendix

Troubleshooting

 

 

Problem

Solution

 

Check if the resolution of the output device matches with the presenter.

 

Ex) If the projector’s highest video mode is SVGA and the presenter’s output resolution has

 

been set to XGA or SXGA, no image will be displayed on the screen.

No video is displayed.

yyCheck if the output device has set a proper input source.

 

yyCheck if brightness and focus are adjusted properly.

 

yyCheck if video cable is properly connected to output port.

 

yyCheck if the OUTPUT MODE is set to VGA / USB.

Displayed screen is out of focus.

yyCheck if the subject is too close to the lens module.

 

yyCheck if the SDP program is installed on your PC properly.

USB communication with the PC

yyCheck if the operating system is Windows XP or Mac OS X 10.5.8 or later. A lower

fails.

version of Windows may cause a trouble.

 

yyFor further information, refer to the software user’s manual (for Windows / Macintosh)

 

provided with the product.

28_ appendix

Page 28
Image 28
Samsung SDP-760 user manual Troubleshooting