Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the lV may cause the lV to fall. In particular, ensure your children do not hang over or destabilize the lV. Doing so may cause the lV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your lV. For added stability and safety, you can purchase and install the
The TV-Holder Kit (Sold Separately)
The parts below are included in the lV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw appropriate for the wall or cabinet you intend to secure the
| (M6 X L16 : 32 - 40 inch 1Vs) | (M8 X L1 9 : 46 inch TV) |
Screw CD | Screw® |
Installing the
1.Remove the screw attached to the back of your lV, and then connect the
~Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.
2.Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the lV is to be installed.
~If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a molly to anchor the screw.
3.Tie the
~Install the TV close to the wall so that it does not fall.
~When attaching the lV Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
~Check the cord occasionally to make sure it is secure.
~Before moving the TV, separate the connected cord first.
Wall
4.Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.
To purchase the
-In the United States:
-In Canada:
