Name and Function of Each Section 
Back
Connection
LENS
Video Output Jack
Used to connect an external video monitor in jack.
D&N
Used to input Day & Night Control Signal
Power LED
The LED turns on when power is supplied.
Remote Jack
Used to connect a remoteplug.
The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both
Notes
If the lens is marked with fingerprints or other marks, the image quality might be poor.
It is recommended to use a high quality lens to improve the image quality under low illumination.
For using main functions it is recommended to use Auto Iris Lens with DC type.
Installing Auto Iris Lens
1. Peel approximately 8mm from the end of the lens cable outer cover.
approx. 8mm
MD Output Terminal 
Used to output motion detection signal.
Frame Ground 
AC / DC Power Terminal 
Used to connect an AC 24V or DC 12V power source.
2. Peel approximately 2mm from the end of the cable inner cover.
approx. 2mm
COLOR CCD CAMERA 14 User’s Manual | COLOR CCD CAMERA 15 User’s Manual |
