Samsung SHC-730N/P Installing C/CS-Mount lens, Mounting a CS-Mount lens, Video type DC type

Connection

3.Remove the cover from the iris lens plug supplied, and solder the lens cable to the plug as shown below.

• Video type :	• DC type :
No. 1 Pin --- Red (Power source)	No. 1 Pin --- Damping -
No. 2 Pin --- N.C	No. 2 Pin --- Damping +
No. 3 Pin --- White (Video signal)	No. 3 Pin	--- Drive +
No. 4 Pin --- Black (GND)	No. 4 Pin	--- Drive -

	Lens cable
No. 3	Pin
No. 1 Pin	connector
	No. 4 Pin
	No. 2 Pin

4.Remove the protective cap, and attach the lens to the camera by turning clockwise.

5.Connect the lens plug to the auto iris connector on the right side of the camera.

6.Set the DC/VIDEO selection switch to DC or VIDEO according to the type of the lens.

Installing C/CS-Mount lens

Before mounting a lens, please check whether it is a C-mount or CS-mount lens. The back focus is set for the CS-mount lens at the factory.

•Mounting a CS-Mount lens

After removing the protecting cap, attach the lens into the camera by turning clockwise.

Notes

Use the lens under the specification as shown. Otherwise the lens can damage the camera or abnormal fixing may result.

C-mount lens : 10 mm or less

CS-mount lens : 5 mm or less

A heavy lens may disturb the balance with the camera and possibly result in damage. Don't use a lens heavier than 450g.

It is recommended to set the lens ALC mode to Av mode (Average). Pk mode can be occurred hunting.

COLOR CCD CAMERA 16 User’s Manual COLOR CCD CAMERA 17 User’s Manual