Samsung SHC-730N/P instruction manual Lens Selection, Tips on Using the Motion Detection Feature

Models: SHC-730N/P

1 24
Download 24 pages 42.13 Kb
Page 16
Image 16

Operating Your Camera

· When completed, press END button.

Notes

Tips on Using the Motion Detection Feature

After selecting zone and sensitivity, perform a test operation to make sure it works properly.

If the lighting flickers, the motion detection feature might not work properly.

The object should occupy 10% or more of its zone. The bigger the object, the higher sensitivity.

If the brightness of an object changes rapidly by sudden lighting change, the camera may detect it as a motion.

When this feature is activated, another algorithm may take more time to be operated.

This system does not guarantee prevention of fires or thefts. The manufacturer is not responsible for any accident or damage.

You can use the MD output terminal jack on the rear of the camera to connect an external alarm device. For details, see page 40.

Lens Selection

You can set the type of the lens, and control the brightness of the screen.

1.Press the SET button to display the setup menu and move the arrow indicator to 'Lens' using the UP or DOWN button.

2.Set ‘Lens’ to the desired mode using LEFT or RIGHT button.

• You can select from DC / Video, Manual

DC / Video: When using auto iris lens

 

 

SETUP

CAMERA

ID

OFF

BACKLIGHT

WDR

WHITE

BAL.

ATW

MOTION

DET.

OFF

LENS

 

DC

SHUTTER

ESC

When using Auto Iris Lens with Video type

Adjust ALC volume on the lens properly. Normally ALC volume should be turned all the way to Av(Average).

According to the type of the lens used, the lens may not perform properly. In such a case, adjust the volume level on the lens.

For using VIDEO LENS, at first, execute IRIS ADJ(Press ‘SET’ button locating the cursor on ‘IRIS ADJ’). If operation fails, ‘Err Can’t Close : Turn down’ or ‘Iris Test Err Flicker’ message is displayed. Then you should adjust volume level. Until ‘Lens Level Adjustment OK’ message is displayed, adjust volume level repeatly.

Notes

When trying to execute IRIS ADJ, do it under as below conditions.

-shoot a white paper or bright wall.

-shoot light resource or bright area. (more than 150lux)

COLOR CCD CAMERA 30 User’s Manual

COLOR CCD CAMERA 31 User’s Manual

Page 16
Image 16
Samsung SHC-730N/P Lens Selection, Tips on Using the Motion Detection Feature, When using Auto Iris Lens with Video type