installation

Remote Controller

SEARCH

BACKUP(ARCHIVING)

Switches to search mode for video search. At the moment,

Switches to backup mode.

you should select an authorized user and enter the password.

 

POWER

 

Turns on or off the system.

 

CHANNEL

If you press a channel number in real time monitoring or search mode, the camera’s input of the selected channel is displayed in full screen.

ID

Used to separately control each DVR in a multi DVR system by setting a unique ID for each DVR.

PLAY

Plays the search screen or adjusts the speed.

MENU

You will see various menu items including settings,

search and backup.

SEARCH NAVIGATION

Used to move between menu items in searching for or playing

recorded video.

VIEW(DISP)

Selects a split mode. You can select one from full-screen, multi-split and sequence modes.

REC

Performs the recording.

RETURN

Cancels the setting and moves to the previous screen.

ENTER

Selects a menu item or applies your setting.

Changing the remote control ID

In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that you have set using the ID button.

1.Press the ID button to check the ID of each of "IR REMOTE CONTROLLER" and DVR.

￿The defaults are 00 for the SYSTEM ID and 00 for the REMOTE ID, respectively.

￿The REMOTE ID and the SYSTEM ID can only be checked in Live mode.

. To change the REMOTE ID of the IR REMOTE CONTROLLER, press and hold the ID button while entering a desired combination of two digits from 00 to 99.

. To change the ID of the DVR, refer to "Control Device > SYSTEM ID". (Page 36) . Press the ID button of the "IR REMOTE CONTROLLER" to check the ID.

M

￿ If the system number defined in "CONTROL DEVICE" is different from the number specified using the remote

 

control, no other button than the [ID] buttons will operate.

10_ installation