Samsung SHR-1041K SHR-1041K/SAM hdd event, aLarm input, aLarm output

hdd event

.In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <event/sensor>.

.Select <hdd event> and use the up/down buttons ($%/ ENTER) to set a desired item.

•disK FuLL event : You can set to notify the user when the HDD is full.

-This is applied only if you have set <overwrite> in <disK management> to <oFF>.

.When your settings are completed, click <appLy> on the bottom.

Your settings will be applied.

CAM1			CAM1
	EVENT/SENSOR
	HDD
	EVENT	DISK FULL EVENT			ON
	ALARM
	INPUT
	ALARM
	OUTPUT
CAM1BUZZER			CAM1
	OUTPUT
	E-MAIL
	NOTIFICATION
				APPLY	UNDO

settings ●

aLarm input

.In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <event/ sensor>.

.Select <aLarm input> and use the direction buttons ($%_+/ENTER) to set a desired item.

•operation : Set the connection status of the alarm sensor to either ENABLE or DISABLE.

-If the alarm sensor is set to <enaBLe> and you have set to perform recording if an alarm occurs, the Live screen displays the alarm recording standby mode. (Page 18)

-The INPUT type of the alarm is N/O(Normal Open).

.When your settings are completed, click <appLy> on the bottom.

Your settings will be applied.

CAM1			CAM1
	EVENT/SENSOR
	HDD
	EVENT		OPERATION
		1	DISABLE
	ALARM	2	DISABLE
	INPUT
		3	DISABLE
	ALARM	4	DISABLE
	OUTPUT
CAM1BUZZER			CAM1
	OUTPUT
	E-MAIL
	NOTIFICATION

APPLY UNDO

aLarm output

. In the <system setup> window, use the direction	CAM1					CAM1
buttons ($%_+/ENTER) to select <event/sensor>.
		EVENT/SENSOR
. Select <aLarm output> and use the direction buttons		HDD
		EVENT		OPERATION	DISABLE		HDD EVENT			ON
($%_+/ENTER) to select and set a desired item.				MODE	LATCHED		DURATION		5 SEC
		INPUT
		ALARM
• operation : Set the operation of the alarm output.					ALARM	VIDEO LOSS			MOTION
		OUTPUT		1
		ALARM
- If set to <enaBLe>, the applicable menu is activated		BUZZER
				3
where you can set other options.	CAM1	OUTPUT		2
			4
- If set to <disaBLe>, other items will be disabled.		E-MAIL
		NOTIFICATION
• mode : Set the output mode of the alarm.								APPLY		UNDO

- If set to <Latched>, the alarm will sound for as much time as defi ned in DURATION.

-If set to <transparent>, the DURATION item will be disabled.

•hdd event : Set to use the alarm output if the HDD is full.

•duration : Set the duration of the alarm output.

-If you select <until>, the buzzer will be stopped when you press any button on the front panel or the remote control.

•aLarm, video Loss, motion : Set the alarm output for each channel if an event of alarm, video loss or motion detection occurs.

.When your settings are completed, click <appLy> on the bottom. Your settings will be applied.

English _