settings
Line Type | Connection Mode | DDNS Setting | Router | Port Forwarding |
|
|
|
|
|
Public IP | Static IP | Not defined | X | X |
|
|
|
|
|
| Dynamic IP | Defined | X | X |
|
|
|
|
|
| Dynamic IP | Defined | O | O |
|
|
|
|
|
Private IP | Static IP (Internal) | Defined | X | O |
|
|
|
|
|
.When your settings are completed, click <APPLY> on the bottom. Your settings will be applied.
•DDNS Setting
| If the DVR is connected directly to the Internet | If the DVR is connected via the router | |
| modem | ||
|
| ||
|
|
| |
1 | Move to "System" "Network". |
| |
|
|
| |
2 | Set DHCP and DDNS Enabled. | Set DHCP Disabled and DDNS Enabled. | |
|
|
| |
3 | Restart the system. | When the system restarts, move to "System" | |
"Network". | |||
|
| ||
|
|
| |
4 | Move to "SYSTEM MANAGEMENT" |
| |
"SYSTEM INFORMATION". |
| ||
|
| ||
|
|
| |
|
| Check the IP address. | |
5 | Check the DDNS Domain Name. | If you are not sure about the IP, contact your | |
network administrator. | |||
|
| ||
|
| (Example of the private IP: 192.168.10.113) | |
|
|
| |
6 |
| Check the DDNS Domain Name. | |
|
|
| |
7 |
| Restart the system. | |
|
|
| |
|
| You should connect to the router and configure | |
8 |
| the router settings of Port Forwarding or DMZ | |
| Server. | ||
|
| ||
|
| (DVR connection port port 6100 & 80) | |
|
|
| |
9 |
| You should set the static IP of the DVR in | |
| accordance with port 6100 & 80 of the router. | ||
|
| ||
|
|
| |
| If you are using a remote access program, you can enter the set's Domain Name including the last 6 | ||
10 | bytes of the MAC Address instead of the IP address. | ||
- If the MAC address is | |||
| |||
| - The domain name of the appropriate set is included in the system information. | ||
|
|
| |